Cabinet Installation Refacing Cumming made simple: this page covers real local costs, realistic timelines and the next steps for Dunwoody-area homeowners, with a free consultation and installation approved.

A cabinet project in Cumming is easier when scope, budget and schedule are clear before work starts. Our offer is a free consultation, installation approved.

Free consultation, installation approved. Call (470) 847-9076 or request your free consultation.

Cumming at a glance

Cumming sits in Forsyth County, Georgia. Census data from the American Community Survey 2024 (via Data USA) shows what the housing market around your cabinet project looks like.

Measure (ACS 2024)CummingDunwoody
Population8,46951,758
Median household income$85,868$121,903
Median property value$382,900$602,900
Owner-occupied housing48%56.2%
Home value to income ratio4.5 to 14.9 to 1

What the numbers mean for a cabinet project in Cumming

Cumming is a city with a large renter share (only 48% of homes are owner-occupied), so many remodels are investor flips, pre-sale updates or long-held homes within a mixed housing stock. A median property value of $382,900 is on the more affordable side of the metro, where a focused scope often gives the best return on every dollar. A common rule of thumb is to invest roughly 10 to 15 percent of a home’s value in a kitchen remodel, which for a typical Cumming home works out to about $38,000 to $57,000. Treat that as a ceiling for planning, not a target: smaller kitchens and tighter scopes can be done for less.

The ratio of home value to household income in Cumming is about 4.5 to 1, compared with 4.9 to 1 in Dunwoody. A lower ratio means home prices are closer to local incomes, so a measured scope with strong finishes tends to give the best balance of cost and return.

We do not publish a fixed price because every kitchen differs. What we can say is that the number depends on size, the condition of what is behind the walls, the materials you choose and whether the layout changes. The ranges below are planning figures from typical Atlanta-area projects, not a quote.

What a cabinet project includes

Cabinets are the largest single cost and the largest visual element in a kitchen. The choice is between replacing them, refacing the existing boxes with new doors and veneer, or installing a new stock, semi-custom or custom line.

  • Measuring and layout verification
  • Removal of existing cabinets and hardware
  • Leveling, scribing and securing new boxes
  • Door and drawer hardware, soft-close hinges and fillers
  • Crown, toe kick and trim
  • Refacing: new doors, drawer fronts and veneer on existing boxes

Not every project needs every item. During the free consultation we measure the space, look at what you want to keep and write a scope that matches your goals and budget in Cumming.

Planning ranges for cabinet project in Cumming

TierTypical rangeWhat it covers
Refacing$6,000 to $14,000New door and drawer fronts and veneer on solid existing boxes
Stock or semi-custom$12,000 to $28,000New cabinets in standard or modified sizes
Custom$28,000 to $60,000Built to your dimensions with premium finishes and interiors

These ranges reflect typical Atlanta-area materials and labor and will shift with the market, your selections and what we find during demolition. For a Cumming home valued near $382,900, the middle tier is inside the 10 to 15 percent rule of thumb ($38,000 to $57,000), while the top tier sits within it and makes most sense when you plan to stay long term.

How the project runs

  1. Free consultation. We walk the space, talk through goals and take measurements.
  2. Scope and budget. You get a written scope with options at more than one price level.
  3. Selections. We help you choose stock cabinets, semi-custom cabinets and other finishes before ordering.
  4. Ordering and permits. Long lead items are ordered and we confirm permit needs with the Cumming or Forsyth County building office.
  5. Demolition and prep. Dust barriers go up and the room is opened to the studs where needed.
  6. Rough work. Framing, plumbing and electrical are completed and inspected where required.
  7. Installation. Finish trades install the work in the right order.
  8. Final walkthrough. We list anything left, finish it and review care instructions with you.

Timeline: 1 to 3 weeks of install after a 4 to 10 week order lead time. Your actual schedule depends on lead times and how much of the room changes.

Choices that move the price

OptionTypical costNotes
Stock cabinets$100 to $300 per linear ftFastest delivery
Semi-custom cabinets$200 to $600 per linear ftMore sizes and finishes
Custom cabinets$500 to $1,200 per linear ftExact fit and interiors
Refacing$90 to $220 per linear ftKeeps existing boxes
Painted finish upgrade$1,000 to $4,000Hand or sprayed lacquer

Prices vary by supplier and design. We show you the options side by side during the consultation so you can see what each upgrade buys.

How Cumming compares with nearby cities

Budgets shift with the housing market. Here is how Cumming stacks up against two other cities we serve, using the same Census figures.

  • Duluth ($400,800 median value): home values in Cumming are 4% lower and median household income is $85,868 versus $95,331. A project in Cumming often benefits from a tighter, well-prioritized scope.
  • Woodstock ($436,500 median value): home values in Cumming are 12% lower and median household income is $85,868 versus $103,496. A project in Cumming often benefits from a tighter, well-prioritized scope.

These comparisons are context, not rules. Two homes on the same street can need very different scopes depending on age, layout and what the owners want.

Choosing between the tiers

Refacing ($6,000 to $14,000). New door and drawer fronts and veneer on solid existing boxes. This is a good fit when the existing layout works and the goal is a visible upgrade without surprises.

Stock or semi-custom ($12,000 to $28,000). New cabinets in standard or modified sizes. This is a good fit when the existing layout works and the goal is a visible upgrade without surprises.

Custom ($28,000 to $60,000). Built to your dimensions with premium finishes and interiors. This is a good fit when the existing layout works and the goal is a visible upgrade without surprises.

Choosing between options

Stock cabinets typically runs $100 to $300 per linear ft. Fastest delivery. Compare it side by side with one step up and one step down in price.

Semi-custom cabinets typically runs $200 to $600 per linear ft. More sizes and finishes. Think about how you cook and clean day to day, since that decides how it wears.

Custom cabinets typically runs $500 to $1,200 per linear ft. Exact fit and interiors. Check lead times before you commit so the schedule holds.

Refacing typically runs $90 to $220 per linear ft. Keeps existing boxes. Think about how you cook and clean day to day, since that decides how it wears.

Living through the project

Most homeowners stay in the house during a cabinet project. Plan for dust, noise and limited access to the room. We set up protection between the work zone and the rest of the home, agree on working hours and tell you what is happening each week. If you cook at home, set up a temporary station with a microwave, a small fridge and a kettle in another room. Expect some days with no water or power to the area while plumbing and electrical work is done, and ask us for those dates in advance.

Care and maintenance afterward

When the job is done we review how to care for what was installed: cleaners to use, products to avoid, sealing schedules for natural stone and how to adjust hinges or fixtures. We also leave you with a list of the products and finishes used so replacements and touch-ups are easy later. Keep the paperwork for permits, appliance manuals and warranties together in one place, since it helps with future repairs and with resale in Cumming.

Mistakes we help you avoid

  • Ordering before field measurements are verified
  • Not checking if existing boxes are in good shape before refacing
  • Ignoring filler and crown requirements
  • Forgetting to plan for appliance clearances
  • Choosing hardware that does not fit the door profile

Most of these come down to the same thing: deciding too late. Settling the layout, appliance models and finishes before ordering keeps the project on schedule and the budget predictable.

Permits, inspections and HOA in Cumming

Plumbing, electrical and structural changes generally require permits, and cosmetic work often does not. Requirements differ between jurisdictions, so we confirm what applies with the Cumming and Forsyth County building offices before work starts and coordinate inspections as the job progresses. If your home is in a homeowners association, check its rules on exterior work, working hours and dumpster placement. We can help you prepare the information the association asks for.

Always ask your contractor who pulls the permit and who is present at inspections. Homeowners are sometimes allowed to pull their own permits for their primary residence, but contractors are normally responsible for permits on work they perform. We will explain how it works for your project.

Before the first visit

  • Photograph the room from each corner and the adjacent spaces.
  • Note what you like and dislike about how it works today.
  • Collect pictures of finishes, colors or layouts you like.
  • Decide a rough budget range and your preferred start window.
  • Find any HOA rules or past permit paperwork for the home.
  • List appliances you plan to keep or replace.

Where we work in Cumming

Our service area in Cumming includes homeowners near Downtown Cumming, Lake Lanier and Sawnee Mountain, along with the neighborhoods in between. Cumming is in Forsyth County, and we plan each consultation around your street, your homeowners association and the age of your home, so what we tell you is specific to your address. If you are not sure whether we cover your property, call (470) 847-9076 and we will confirm. Free consultation, installation approved.

Common questions

Is refacing cheaper than replacing?

Usually yes when the layout stays and the existing boxes are solid, often by thirty to fifty percent.

How long are cabinet lead times?

Stock lines can ship in a couple of weeks. Semi-custom and custom typically run four to ten weeks.

Can you install cabinets I bought elsewhere?

Yes, we can discuss installation of cabinets purchased through other suppliers.

What does the consultation cover?

We measure, discuss options and budget. It is a free consultation, installation approved.

Do you serve Cumming?

Yes. Cumming is part of our service area across Forsyth County and the north Atlanta metro, and the free consultation is the same everywhere we work.

Is the price on this page a quote?

No. It is a planning range based on typical projects. A written scope after the consultation gives the real number for your home.

Nearby areas we serve

We also work in Dunwoody, Alpharetta, Johns Creek, and across the full service area. Planning your budget? Read the kitchen remodel cost guide and our financing options.

Free consultation, installation approved. Call (470) 847-9076 or request your free consultation.

Cabinet Installation Refacing Cumming: what to expect from a local team

When you plan cabinet installation refacing cumming, ask for a written scope, a fixed timeline and clear pricing. Our team walks every cabinet installation refacing cumming project through the same steps. First comes a free consultation, then a measured quote, and finally an approved installation date.

Homeowners researching cabinet installation refacing cumming can also compare national benchmarks from the National Association of Home Builders and local housing data from the U.S. Census Bureau.

Ready to start? Call (470) 847-9076 to book your free consultation, installation approved. Your cabinet installation refacing cumming quote is free, and there is no obligation.

Quick answers about cabinet installation refacing cumming

What affects the price of cabinet installation refacing cumming?

Size, materials, layout changes and access all affect the price of cabinet installation refacing cumming. A free consultation gives you a clear number before you commit.

How do I get started with cabinet installation refacing cumming?

Call (470) 847-9076 or book online. Your cabinet installation refacing cumming consultation is free, and installation is approved on your schedule.

Can I compare quotes for cabinet installation refacing cumming?

Yes. Compare scope, materials and timelines side by side when you review any cabinet installation refacing cumming quote.

Where do you work?

We serve Dunwoody and nearby Metro Atlanta cities. Ask us about cabinet installation refacing cumming availability in your neighborhood.

Explore Dunwoody Kitchen Remodeling

AboutContact & Book ServiceBook Online / ScheduleReviews & TestimonialsService Areas We CoverService AreaFAQFinancingGet an EstimateProjectsKitchen Remodel IdeasBlog

Latest guides

Kitchen Appliance Package Planning: Sizes, Specs and Lead TimesKitchen Ventilation and Range Hood Guide: Sizing, Ducting and NoiseKitchen Cabinet Hardware Guide: Pulls, Knobs, Hinges and SlidesWorking With a Designer: What They Do and How to Get the Most From ThemRemodel in Phases: How to Spread a Renovation Over TimeAdding Value Before Selling: Which Updates Are Worth It?Hardwood vs Luxury Vinyl Plank: Which Is Better for Your Home?Cabinet Refacing vs Replacement: Cost, Time and When Each Makes Sense

Free consultation, installation approved. Call (470) 847-9076.

How much of a kitchen remodel comes back at resale (2025)

National averages from the 2025 Cost vs Value report show that a smaller, well-planned minor remodel recouped more than its cost at resale, while larger remodels recouped a smaller share. Bar length shows percent of job cost recouped. Resale value is not guaranteed in any market, so treat this as context for planning your scope.

$522 billionprojected U.S. homeowner remodeling spending by end of 2026
+2.9%projected year-over-year growth, early 2026
+1.6%projected year-over-year growth, end of 2026

Sources: Remodeling magazine, 2025 Cost vs Value Report (national averages); Pro Remodeler, Jan. 29, 2026 reporting the Harvard Joint Center for Housing Studies Leading Indicator of Remodeling Activity (JCHS). National figures, not Dunwoody-specific quotes.

Free consultation, installation approved. Tell us about your kitchen and we will walk the space, talk through scope and priorities, and put the plan in writing.

Free consultation, installation approvedTell us about your Dunwoody kitchen project and we plan it with you.
☎ Call (470) 847-9076Request Estimate