Cabinet Installation Refacing Milton made simple: this page covers real local costs, realistic timelines and the next steps for Dunwoody-area homeowners, with a free consultation and installation approved.

Planning a cabinet project in Milton? Here is how the project runs, what it costs and what to decide first. Our offer is a free consultation, installation approved.

Free consultation, installation approved. Call (470) 847-9076 or request your free consultation.

Milton at a glance

Milton sits in Fulton County, Georgia. Census data from the American Community Survey 2024 (via Data USA) shows what the housing market around your cabinet project looks like.

Measure (ACS 2024)MiltonDunwoody
Population41,54651,758
Median household income$171,295$121,903
Median property value$789,000$602,900
Owner-occupied housing72.5%56.2%
Home value to income ratio4.6 to 14.9 to 1

What the numbers mean for a cabinet project in Milton

Milton is a strongly owner-occupied city (72.5% of homes), where most remodels are long-term upgrades homeowners plan to live with. A median property value of $789,000 is above the Atlanta-area midrange, which usually supports a higher-spec kitchen because the finished room sits next to well-finished neighbors. A common rule of thumb is to invest roughly 10 to 15 percent of a home’s value in a kitchen remodel, which for a typical Milton home works out to about $79,000 to $118,000. Treat that as a ceiling for planning, not a target: smaller kitchens and tighter scopes can be done for less.

The ratio of home value to household income in Milton is about 4.6 to 1, compared with 4.9 to 1 in Dunwoody. A lower ratio means home prices are closer to local incomes, so a measured scope with strong finishes tends to give the best balance of cost and return.

We do not publish a fixed price because every kitchen differs. What we can say is that the number depends on size, the condition of what is behind the walls, the materials you choose and whether the layout changes. The ranges below are planning figures from typical Atlanta-area projects, not a quote.

What a cabinet project includes

Cabinets are the largest single cost and the largest visual element in a kitchen. The choice is between replacing them, refacing the existing boxes with new doors and veneer, or installing a new stock, semi-custom or custom line.

  • Measuring and layout verification
  • Removal of existing cabinets and hardware
  • Leveling, scribing and securing new boxes
  • Door and drawer hardware, soft-close hinges and fillers
  • Crown, toe kick and trim
  • Refacing: new doors, drawer fronts and veneer on existing boxes

Not every project needs every item. During the free consultation we measure the space, look at what you want to keep and write a scope that matches your goals and budget in Milton.

Planning ranges for cabinet project in Milton

TierTypical rangeWhat it covers
Refacing$6,000 to $14,000New door and drawer fronts and veneer on solid existing boxes
Stock or semi-custom$12,000 to $28,000New cabinets in standard or modified sizes
Custom$28,000 to $60,000Built to your dimensions with premium finishes and interiors

These ranges reflect typical Atlanta-area materials and labor and will shift with the market, your selections and what we find during demolition. For a Milton home valued near $789,000, the middle tier is inside the 10 to 15 percent rule of thumb ($79,000 to $118,000), while the top tier sits within it and makes most sense when you plan to stay long term.

How the project runs

  1. Free consultation. We walk the space, talk through goals and take measurements.
  2. Scope and budget. You get a written scope with options at more than one price level.
  3. Selections. We help you choose stock cabinets, semi-custom cabinets and other finishes before ordering.
  4. Ordering and permits. Long lead items are ordered and we confirm permit needs with the Milton or Fulton County building office.
  5. Demolition and prep. Dust barriers go up and the room is opened to the studs where needed.
  6. Rough work. Framing, plumbing and electrical are completed and inspected where required.
  7. Installation. Finish trades install the work in the right order.
  8. Final walkthrough. We list anything left, finish it and review care instructions with you.

Timeline: 1 to 3 weeks of install after a 4 to 10 week order lead time. Your actual schedule depends on lead times and how much of the room changes.

Choices that move the price

OptionTypical costNotes
Stock cabinets$100 to $300 per linear ftFastest delivery
Semi-custom cabinets$200 to $600 per linear ftMore sizes and finishes
Custom cabinets$500 to $1,200 per linear ftExact fit and interiors
Refacing$90 to $220 per linear ftKeeps existing boxes
Painted finish upgrade$1,000 to $4,000Hand or sprayed lacquer

Prices vary by supplier and design. We show you the options side by side during the consultation so you can see what each upgrade buys.

How Milton compares with nearby cities

Budgets shift with the housing market. Here is how Milton stacks up against two other cities we serve, using the same Census figures.

  • Sandy Springs ($619,800 median value): home values in Milton are 27% higher and median household income is $171,295 versus $104,340. A project in Milton can usually support a slightly higher specification.
  • Sugar Hill ($413,400 median value): home values in Milton are 91% higher and median household income is $171,295 versus $107,389. A project in Milton can usually support a slightly higher specification.

These comparisons are context, not rules. Two homes on the same street can need very different scopes depending on age, layout and what the owners want.

Choosing between the tiers

Refacing ($6,000 to $14,000). New door and drawer fronts and veneer on solid existing boxes. This tier suits homeowners who want to control cost and are comfortable with a focused scope.

Stock or semi-custom ($12,000 to $28,000). New cabinets in standard or modified sizes. This tier suits homeowners who want to control cost and are comfortable with a focused scope.

Custom ($28,000 to $60,000). Built to your dimensions with premium finishes and interiors. This tier suits homeowners who want to control cost and are comfortable with a focused scope.

Choosing between options

Stock cabinets typically runs $100 to $300 per linear ft. Fastest delivery. Check lead times before you commit so the schedule holds.

Semi-custom cabinets typically runs $200 to $600 per linear ft. More sizes and finishes. Ask to see a full sample in your own lighting before deciding.

Custom cabinets typically runs $500 to $1,200 per linear ft. Exact fit and interiors. Think about how you cook and clean day to day, since that decides how it wears.

Refacing typically runs $90 to $220 per linear ft. Keeps existing boxes. Ask to see a full sample in your own lighting before deciding.

Living through the project

Most homeowners stay in the house during a cabinet project. Plan for dust, noise and limited access to the room. We set up protection between the work zone and the rest of the home, agree on working hours and tell you what is happening each week. If you cook at home, set up a temporary station with a microwave, a small fridge and a kettle in another room. Expect some days with no water or power to the area while plumbing and electrical work is done, and ask us for those dates in advance.

Care and maintenance afterward

When the job is done we review how to care for what was installed: cleaners to use, products to avoid, sealing schedules for natural stone and how to adjust hinges or fixtures. We also leave you with a list of the products and finishes used so replacements and touch-ups are easy later. Keep the paperwork for permits, appliance manuals and warranties together in one place, since it helps with future repairs and with resale in Milton.

Mistakes we help you avoid

  • Ordering before field measurements are verified
  • Not checking if existing boxes are in good shape before refacing
  • Ignoring filler and crown requirements
  • Forgetting to plan for appliance clearances
  • Choosing hardware that does not fit the door profile

Most of these come down to the same thing: deciding too late. Settling the layout, appliance models and finishes before ordering keeps the project on schedule and the budget predictable.

Permits, inspections and HOA in Milton

Plumbing, electrical and structural changes generally require permits, and cosmetic work often does not. Requirements differ between jurisdictions, so we confirm what applies with the Milton and Fulton County building offices before work starts and coordinate inspections as the job progresses. If your home is in a homeowners association, check its rules on exterior work, working hours and dumpster placement. We can help you prepare the information the association asks for.

Always ask your contractor who pulls the permit and who is present at inspections. Homeowners are sometimes allowed to pull their own permits for their primary residence, but contractors are normally responsible for permits on work they perform. We will explain how it works for your project.

Before the first visit

  • Photograph the room from each corner and the adjacent spaces.
  • Note what you like and dislike about how it works today.
  • Collect pictures of finishes, colors or layouts you like.
  • Decide a rough budget range and your preferred start window.
  • Find any HOA rules or past permit paperwork for the home.
  • List appliances you plan to keep or replace.

Where we work in Milton

Our service area in Milton includes homeowners near Crabapple, Birmingham Park and Providence Park, along with the neighborhoods in between. Milton is in Fulton County, and we plan each consultation around your street, your homeowners association and the age of your home, so what we tell you is specific to your address. If you are not sure whether we cover your property, call (470) 847-9076 and we will confirm. Free consultation, installation approved.

Common questions

Is refacing cheaper than replacing?

Usually yes when the layout stays and the existing boxes are solid, often by thirty to fifty percent.

How long are cabinet lead times?

Stock lines can ship in a couple of weeks. Semi-custom and custom typically run four to ten weeks.

Can you install cabinets I bought elsewhere?

Yes, we can discuss installation of cabinets purchased through other suppliers.

What does the consultation cover?

We measure, discuss options and budget. It is a free consultation, installation approved.

Do you serve Milton?

Yes. Milton is part of our service area across Fulton County and the north Atlanta metro, and the free consultation is the same everywhere we work.

Is the price on this page a quote?

No. It is a planning range based on typical projects. A written scope after the consultation gives the real number for your home.

Nearby areas we serve

We also work in Dunwoody, Alpharetta, Johns Creek, and across the full service area. Planning your budget? Read the kitchen remodel cost guide and our financing options.

Free consultation, installation approved. Call (470) 847-9076 or request your free consultation.

Cabinet Installation Refacing Milton: what to expect from a local team

When you plan cabinet installation refacing milton, ask for a written scope, a fixed timeline and clear pricing. Our team walks every cabinet installation refacing milton project through the same steps. First comes a free consultation, then a measured quote, and finally an approved installation date.

Homeowners researching cabinet installation refacing milton can also compare national benchmarks from the National Association of Home Builders and local housing data from the U.S. Census Bureau.

Ready to start? Call (470) 847-9076 to book your free consultation, installation approved. Your cabinet installation refacing milton quote is free, and there is no obligation.

Quick answers about cabinet installation refacing milton

What affects the price of cabinet installation refacing milton?

Size, materials, layout changes and access all affect the price of cabinet installation refacing milton. A free consultation gives you a clear number before you commit.

How do I get started with cabinet installation refacing milton?

Call (470) 847-9076 or book online. Your cabinet installation refacing milton consultation is free, and installation is approved on your schedule.

Can I compare quotes for cabinet installation refacing milton?

Yes. Compare scope, materials and timelines side by side when you review any cabinet installation refacing milton quote.

Where do you work?

We serve Dunwoody and nearby Metro Atlanta cities. Ask us about cabinet installation refacing milton availability in your neighborhood.

Explore Dunwoody Kitchen Remodeling

AboutContact & Book ServiceBook Online / ScheduleReviews & TestimonialsService Areas We CoverService AreaFAQFinancingGet an EstimateProjectsKitchen Remodel IdeasBlog

Latest guides

Kitchen Appliance Package Planning: Sizes, Specs and Lead TimesKitchen Ventilation and Range Hood Guide: Sizing, Ducting and NoiseKitchen Cabinet Hardware Guide: Pulls, Knobs, Hinges and SlidesWorking With a Designer: What They Do and How to Get the Most From ThemRemodel in Phases: How to Spread a Renovation Over TimeAdding Value Before Selling: Which Updates Are Worth It?Hardwood vs Luxury Vinyl Plank: Which Is Better for Your Home?Cabinet Refacing vs Replacement: Cost, Time and When Each Makes Sense

Free consultation, installation approved. Call (470) 847-9076.

How much of a kitchen remodel comes back at resale (2025)

National averages from the 2025 Cost vs Value report show that a smaller, well-planned minor remodel recouped more than its cost at resale, while larger remodels recouped a smaller share. Bar length shows percent of job cost recouped. Resale value is not guaranteed in any market, so treat this as context for planning your scope.

$522 billionprojected U.S. homeowner remodeling spending by end of 2026
+2.9%projected year-over-year growth, early 2026
+1.6%projected year-over-year growth, end of 2026

Sources: Remodeling magazine, 2025 Cost vs Value Report (national averages); Pro Remodeler, Jan. 29, 2026 reporting the Harvard Joint Center for Housing Studies Leading Indicator of Remodeling Activity (JCHS). National figures, not Dunwoody-specific quotes.

Free consultation, installation approved. Tell us about your kitchen and we will walk the space, talk through scope and priorities, and put the plan in writing.

Free consultation, installation approvedTell us about your Dunwoody kitchen project and we plan it with you.
☎ Call (470) 847-9076Request Estimate